Niti Polywire (2m)
STROFT NiTi Polywire Wires made of nickel-titanium alloys (NiTi) are enjoying increasing popularity in the PREDATOR FISHING SCENE - mainly because of their unique property of springing back to their original state even after severe bending. However, there are also disadvantages - namely when „connecting“ these nickel-titanium wires to swivels, snaps, hooks and others. Crimps are often used as aids for this purpose. But unfortunately these connections have strongly fluctuating breaking strains, also because of the sharp edges of the crimps. If you crimp them too hard, there is a risk of stress concentration at either end of the crimp (NiTi wires are generally more susceptible to stress concentration than steel wires) and thus a reduction of the wire’s breaking strain. If the crimping is too weak, there is a risk of slippage, which also leads to a reduction in breaking strain. Sometimes „tying a knot“ is recommended. However, there too depending on the wire, only highly fluctuating knot strengths are achieved. In addition, thicker monowires are stiff and tying knots becomes very difficult. STROFT NiTi Polywire solve these problems and are the first choice when it comes to the ultimate predator leader. The connections are quick and easy to make. No crimps, no pliers - a simple, very easy to tie clinch knot with 4 turns is the solution - and with STROFT NiTi (and its thinner wires) it can even achieve up to 100% of the linear breaking strain! This was made possible by a very specific adjustments of the alloy composition to those properties that are desired for predator fishing leaders - namely: maximum abrasion resistance, superelasticity, optimum (simple) knotability, best possible line memory, maximum breaking strain/maximum knot strength, sufficient stretch (8%) and a non-reflective surface. STROFT NiTi Polywire optimally meet all these requirements. Diameter Breaking Strength 0,30 mm 8 kg 0,35 mm 14 kg 0,40 mm 18 kg Length: 2 m
Wire Tippet
Tough, flexible, nylon-coated wire tippet for sharp toothed predatory fish. Supple enough to tie a fly. Length: 4.6m
Hard Mono Nylon
This very abrasion resistant nylon was originally developed for saltwater fishing; this is why many Pike aficionados use Mason Hard Mono instead of steel wire. Mason Hard Type Nylon leader material allows the fisherman to tie his own special leaders for his specific requirements. Hard type nylon is extremely popular for its stiffness. Length: 10 yds Typ Lb. Test (Strength) Diameter HD-25 25 lbs / 11,35 kg 0,635 mm HD-30 30 lbs / 13,61 kg 0,711 mm HD-50 50 lbs / 22,68 kg 0,914 mm HD-60 60 lbs / 27,22 kg 1,016 mm HD-80 80 lbs / 36,29 kg 1,143 mm
Nylon Connector Sleeves
The Mason heavy duty connector sleeves work great for making leaders and rigs, especially for salt water fishing. Made int the USA from brass with a black oxidized finish. Content: 36 pieces Sizes: Typ Fits Outside Diameter Inside Diameter Length 2D / 20 lbs 20 - 25 lbs 2,0 mm 1,2 mm 5,9 mm 3D / 30lbs 30 -40 lbs 2,2 mm 1,4 mm 6,4 mm 6D / 60lbs 60 - 80 lbs 3,4 mm 2,1 mm 9,5 mm 7D / 100 lbs 100 lbs 4,1 mm 2,7 mm 10,1 mm
Titanium Wire Bite Tippet (10 kg)
This bite protection is a must when you are fishing for predators like Pike or Musky. Thanks to the tippet ring, you can tie it easy onto your leader. Length: 30cmStrength: 10kg
Tapered Tarpon Leader
RIO’S TAPERED TARPON LEADER has been designed for the ultimate in performance when tarpon fishing. Most tarpon leaders are level with a shock tippet on the front end. RIO’s Tapered Tarpon Leader has a fully tapered leader running down to the shock tippet, which gives far better turnover and presentation than level ones. The leaders ends with a 2ft length of shock tippet for protection. Inhalt: 2 Stück
Wire & Shock Tippet Material
Wire and shock tippets are essential for targeting toothy predators like pike, musky, barracuda, and sharks. Designed to withstand sharp teeth and abrasive conditions, these tippets offer superior strength and durability. Wire tippets prevent bite-offs with their tough construction, while shock tippets provide added abrasion resistance and flexibility for powerful strikes.
Whether you're fishing in freshwater or saltwater, wire and shock tippets ensure your leader system remains intact during intense battles.
Explore our premium selection to gear up for your next predator fishing adventure.
Key Features:
-
Bite Protection: Ideal for sharp-toothed fish like pike and barracuda.
-
Abrasion Resistance: Withstands rough conditions and heavy strikes.
-
Material Options: Available in wire, fluorocarbon, or nylon-coated designs.
-
Versatility: Suitable for freshwater and saltwater predator fishing.