The kit offers both modern and traditional materials with enough to tie 1000’s of flies. With Feathers, furs and both modern chenille’s and synthetics, enough materials to satisfy any fly tyer.  Content: 1x Vise with clamp 1x Scissors 1x Whip Finisher 1x Bobbin 1x Dubbingneedle 1x Hackle Pliers 1x Fly Tying Booklet 1x Hare Mask 1x Mixed Marabou 1x Block Plastazote 1x Mixed Glister Sparkle Dubbing 1x Stickle Dubbing 1x Zonker Strips 1x Seal Fur substitute 1x Goose Boits mixed Colors 1x Peacock Herl 1x Grey Duck an Hen Pheasant Tails 1x Mixed Squirrel Tails 1x Gold & Silver Beads 1x Damsel eyes 1x Package CDC Feathers 1x MOP Chenille 1x Cactus Chenille 2 Colors 1x Cock Hackles red / Cock Cape black 1x Super Stretch Floss 1x Krystal Flash Pearl 1x Magic Glass Nymph Body Material 1x Ready Stripped Hackle Quills 1x Deer Hair 1x Assorted Colors Holo Tinsel 1x 50 Assorted Quality Hooks 2x English Partridge Grey Hackles Natural & Dyed 1x Suede Chennile 3 Colors 1x Dubbing Wax 2x Tying Thread 1x Lead Wire 1x Gold & Silver Tinsel 1x Glo-Brite Floss & Thread 1x Pearl Tinsel & Mylar

A comprehensive starter kit complete with Vice, Tools, hooks, materials and instruction booklet, supplied in a smart plastic box. All you need to start tying flies! Content: Fly tying vise Bobbin Hackle plier Scissors Dubbingneedle Fly tying yarn & Tinsel Chenille & Dubbing Assorted feathers Hook assortment Instruction booklet

This helpful tool enables you to tie tube flies with your regular vise. Just put the tool adapter into your vise and secure your tube with the needle and you are ready to tie tube flies. Includes 3 needles with different diameters.

From delicate dry flies to fuzzy nymphs and large streamers.

Designed for easy preparation and handling of materials for dubbing and composite loop tying techniques. Length: 2" (5 cm)

The Renzetti Fly Tying Material Carousel is a must have on any tiers bench. The Carousel can handle (16) pieces of material up to 10" in length. It breaks down conveniently into 3 pieces making it very easy to take along to your local fly tying night. Delivery without fly tying material!

This practical plexiglass fly tying tool should not be missing from any tying table. Simply place a CDC pen (also mixed with dubbing) into one of the various wide slots and then grip with a material clamp. So beautiful CDC strands for the loop technique are prepared. Made in Germany.

With this tool it only takes seconds to choose the right hackle for your fly   Length: 7,5 cm

These permanent markers have two tips: one fine tip and a slanting broader tip. You receive 12 different colours. These permanent pens are useful for coloration of flies, lures or fishing lines. You can colour almost every synthetic tying material or lure with these pens to make every streamer or lure an incredible "tease" for all predators. For example: you can imitate the tempting coloration of perches within seconds on every lure. Content: 12 colours per pack

Practial tool that helps you to keep your fly tying vise and work space tidy.

A very appealing and in his conception simple hair stacker. Height: 6 cm

Tool Organizer (for fly tying vices) Keep your tools organised with our practical Tool Organizer (for fly tying vices). Delivery without tying vice or content!

Wing Burner

This particularly elegant tool made of high quality, stainless surgical steel guarantees longevity and precision. With the tweezers you can remove flies from your fly box, analyze insect larvae, analyze the contents of a mixed stomach and many more things.

You can attach this useful waste basket easily to your tying vise. Then you can adjust the position of the basket to catch all the garbage materials. Diameter approx. 15 cm

This modern hair stacker is made of quality stainless steel and ensures that your hair is the same length. This purist, but perfect tool has been developed according to the specifications of professional fly tier Gerhard Laible. The tool is extremely stable due to its own weight and is equipped with two inserts with different diameters and heights. As a result, the most diverse types and amounts of hair can be stacked with this tool. The hair stacker lies tremendously well in the hand. Weight: 128 g (with both inserts)Height: 4 + 5 cm

TRAUN RIVER Aluminium Hair Stacker Practical fly tying tool to get the same length of you hair, especalliy good for deer hair

Introducing the multiloop tool... SwissCDC would like to present you another tool from the ever-expanding "Multi" series of tying tools. With the new multiloop, every fly-tyer will be able to create a dubbing loop using a previously unknown technique to process any material. Christian Kuchelmeister has developed a tool which works without the traditional dubbing twister wires in V-position. A big advantage is that the threads of the dubbing loop always lie together when tightening and there is no gap between them. Other materials, whether flash threads, peacock grass or wire can be easily attached to the tool with a sophisticated fastening method to twist with the material taken up in the loop. This way, it is possible to produce diverse and also very strong dubbing strands. The tool is the size of a bobbin and is very ergonomic in the hand. Thanks to its perfect balance between length and weight and its very accurate centering, our multiloop tool can be rotated very easily and precisely. The weight and the length distribution of the tool allow it to run very accurately when rotating. A tool like a Swiss timepiece... Summary of benefits The tool is made of matted anti-glare steel Twisting materials can be easily attached to the tool There is no gap between the threads No wires get broken Weight of 45 grams  

It consists of four parts and impresses with a very reasonable price. Height: 2 - 5 cm

This useful set includes the most important tools for the fly tyer. The wallet includes: hackle pliers, scissors, dubbing needle, dubbing brush, whip finisher, threader and two ceramic bobbins.

A well tied deer hair fly is judged largely by how tightly it is packed. These hair packers designed by Pat Ehlers will help you accomplish this task.A hair stacker is a tool use to align the tips of hair cut from a hide before attaching it to the fly. It is as simple as putting the fur into the brass tubing, placing the tube into the stacker, and gently tapping a tabletop with it a few times. All of your hair will be aligned and ready to secure to your fly. Made of anodized aluminum and designed by Andy Renzetti and Pat EhlersSize: LARGE - #2 to 6/0

This ergonomic formed dubbing brush looks good and works perfectly. It is made of anodized aluminiun and a steel brush. This fly tying tool will last for your whole life and helps you to brush out dubbing, hairs and tons of other materials. Medium: this is the the right tool for dry flies, nymphs and little streamersLarge: this is the right tool for larger nymphs and any kind of streamers Made in USA

Easy to use! Simply place your beads on any surface with the counter drilled hole facing up, push the corresponding size mounting socket down on the bead, lift, thread the hook through the hole from the bottom of the mounting socket and pull away from the mounting foot. This fine tool is a good alternative to tweezers, needles and fingers! What makes the BeadMaster™ so special... Machine polished stainless steel handle provides a sleek look and comfortable feel and balance. Mounting foot and tip cap are molded from industrial polyurethane to ensure strength, durability and professional finish. Six offset mounting sockets allow for enhanced visibility and easy access to even the smallest bead. Innovative design of mounting sockets incorporates conical taper to align and keep beads in correct orientation. Hook channel facilitates easy removal of hook and bead. Molded reinforced ribs provided support and increased stability for mounting sockets. Each mounting socket is sized and individually labeled for corresponding bead size. Flat bottom of mounting foot allows the BeadMaster™ to stand alone on tying surface for easy access. Axially magnetized, neodymium rare earth magnet helps retrieve and secure hooks for easy access. Socket alignment indicator enables fast location of desired mounting socket when tying multiple flies with same size bead (simply rotate the mounting foot to align the desired socket with the indicator).   More reasons to add the BeadMaster™ to your fly tying arsenal Revolutionary alternative to tweezers, needles, and fingers.  Flexible mounting sockets hold beads in place with no moving parts or mechanical locks. No more beads springing across the room and no more stuck fingers.Innovative offset design of mounting foot and gripping sockets make mounting beads a breeze. Hook channel facilitates easy removal of hook and bead.  See through feature lets you access beads from either end while hook channel facilitates easy removal of hook and bead. Solid, comfortable feel.  Stainless steel handle provides a solid, comfortable feel and accommodates both right and left-handed tyers. Easy to use. Simply place your beads on any surface with the counter drilled hole facing up, push the corresponding size mounting socket down on the bead, lift, thread the hook through the hole from the bottom of the mounting socket and pull away from the mounting foot.Fits standard bead sizes.  Six mounting sockets sized to accommodate the six standard bead sizes from 1/16” to 5/32”. Retrieve and secure hooks. Magnetic tip can be used to remove hooks from packaging and keeps them literally at your fingertips for quicker access.Enables faster tying.  Picks up beads and holds them in the correct position, with little or no manual manipulation of the bead.  Once the bead is in the mounting socket, it stays there until it is mounted on a hook. Not only does it really work, it looks great too.  Sleek professional design combined with the highest quality materials result in a cool looking tool.Strength and durability.  The mounting foot is injection molded as a single component from industrial grade polyurethane resulting in a tool that is strong, flexible and will last a long, long time. Made in the USA.  All parts sourced, manufactured and assembled in the United States of America.

This useful fly tying tool is made of aluminium and every fly tyer should have it. Size: 6/1,6 x 5 x 2 cm

For threading the tying thread in the bobbin holder. Applied the other way around it can be used as a whip-finisher. Length: 14 cm

By clamping this tool in your tying vise, it quickly becomes easy to tie beutiful tube flies in all sizes. Supplied with three different needles for different tube inside diameters. With this practical tool, you can tie any tube flies - no matter if salmon, pike or other tube flies. Tip: To prevent the tube turning on the needle, there is a simple trick! Take a piece of 3x3mm rubber from the disposable glass and put it on the needle first. So the plastic tube pushes on the rubber and is locked. Overall length: 11 cmDelivery without fly!

This tool is essential for fly tying with modern dubbing techniques Width: 6 cm

This Premium Fly Tying Set contains a Fly Tying Vise, tools and plenty of Fly Tying Material. It comes with a practical, robust case! This Premium fly tying kit offers enough materials to tie many different fly patterns for starting your new passion! Please don't forget to additionally order a Fly Varnish.Content: Fly Tying Vise "Classic Super" with base plate Premium Fly Tying Tool Set 60 Premium Hooks 50 Gold Bead Heads / 20 Tungsten Beads Dubbing Dispenser (12 colours) Bulk Whiting Feathers (assorted colours) Download Link Guide "Modernes und einfaches Fliegenbinden"  Deer Hair (natur) Pheasant Centre Tails Peacock Eye Polycelon 2 x Tying Thread 4 packages Chenille  Copper Wire Lead Wire Bodyglass Marbled Latex Ribbing Wire  Please note that colours may vary!

Christian Kuchelmeister has developed a brush that is far ahead in design and functionality of other brushes . With a weight of only 27 grams, the „multibrush“ sits super-precisely in the fly tyer’s hand like a pen. A very sensitive and precise brushing of flies is possible with the front brush, made of stainless steel. The advantage of the hard, yet fine front brush is allready equal to the usual handling as when writing with a pen.  It is possible to brush out even small parts of a fly very precisely. The small round stainless steel brush is predestined for fine work with CDC and hair dubbing. On the back a coarse serrated brush is attached , which can be used to remove the undercoat of trapped hairs in the clamp. The serrated brush is also great for working on voluminous streamers. With the small V-shaped cutout at the rear end, feathers for salmon or front hackles for streamers" can be "doubled" with ease. The pointed spout at the end can be used to do all sorts of jobs that come up at the tying table. A universal brush in a heavy indestructible quality. The brush is provided with a consecutive number in production and is therefore unique.

Verhindert, dass beim Binden des Schlussknotens versehentlich Hechln niedergebunden werden. Länge: 9,5 cm

This threader is used for threading the thread through the bobbin

This tool is made with stainless steel ball-bearings. You can produce very nice dubbing and material threads with this tool. length: 12 cm