Perdigon & Czech Nymph Classics

This is the best way to organize your leaders and shooting heads. It comes with a Cordura front side and a rugged mesh rear side and inside pockets.     Size: 15 x 10 cmMaterials: Cordura / rugged mesh Delivery without content.

These small, extremely strong rings were made public by the famous fly fisherman Edgar Pitzenbauer and used in the grayling fishing. Meanwhile, these rings have spread all over the world among fly fishermen. They are tied to the end of your leader (conical, braided or linear) and allow you again and again to re-tie your leader at the end, without shortening the length of the leader. The individual rings are rounded inside and out and are therefore very smooth. These rings have no solder joint. Thus, a "break point" was prevented and the surface remains very smooth. The rings are extremely light and durable. Also suitable for floating leaders. Especially modern Nymph fishermen use these rings in an enormously wide range of applications. By using it, you will ultimately save money, as your leaders will only have to shorten their fly changes in the front leader material. In addition, the field of application is very diverse. You can use these rings to tie in Springer flies or pike felts, or even use them when drop shot fishing. Recommendation: we strongly advise you to use the rings when using Fluorocarbon leaders / leader material in combination with regular nylon, as this material is apt to cut through the surface hardness of other types of nylon. With a leader ring that does not happen anymore. Even with the use of polyleaders / Versileaders the use of the leader rings is recommended because it no longer shortens the polyleader and the life can be increased enormously. NEW: With practical hand strap!! Content: 10 pieces per packColor: black nickel 6 kg: diameter 2 mm / weight 0.007g8 kg: diameter 2.5 mm / weight 0.008g12 kg: diameter 3.2 mm / weight 0.009 g16 kg: diameter 3.8 mm / weight 0.010g

This new specialty Czech Nymph style leader is essential to be successful with this method.It has the camouflage colours and is perfectly tapered. Available in 450 cm and 900 cm. This leader is part of the key to success for czech nymphing.

These small, extremely strong rings were made public by the famous fly fisherman Edgar Pitzenbauer and used in the grayling fishing. Meanwhile, these rings have spread all over the world among fly fishermen. They are tied to the end of your leader (conical, braided or linear) and allow you again and again to re-tie your leader at the end, without shortening the length of the leader. The individual rings are rounded inside and out and are therefore very smooth. These rings have no solder joint. Thus, a "break point" was prevented and the surface remains very smooth. The rings are extremely light and durable. Also suitable for floating leaders. Especially modern Nymph fishermen use these rings in an enormously wide range of applications. By using it, you will ultimately save money, as your leaders will only have to shorten their fly changes in the front leader material. In addition, the field of application is very diverse. You can use these rings to tie in Springer flies or pike felts, or even use them when drop shot fishing. Recommendation: we strongly advise you to use the rings when using Fluorocarbon leaders / leader material in combination with regular nylon, as this material is apt to cut through the surface hardness of other types of nylon. With a leader ring that does not happen anymore. Even with the use of polyleaders / Versileaders the use of the leader rings is recommended because it no longer shortens the polyleader and the life can be increased enormously. NEW: With practical hand strap!! Content: 10 pieces per packColor: black nickel 6 kg: diameter 2 mm / weight 0.007g8 kg: diameter 2.5 mm / weight 0.008g12 kg: diameter 3.2 mm / weight 0.009 g16 kg: diameter 3.8 mm / weight 0.010g

TRAUN RIVER tapered leaders are manufactured from high quality nylon. The combination of a compact power transport butt part combined with a well-balanced taper let these leaders turn over smoothly. The leader can be tied at the fly line with a nail knot or looped with the integrated perfection loop. Strength Tip diameter (mm) kg 03X 0,43 11,5 02X 0,37 9,5 01X 0,32 7,5 0X 0,27 6,8 1X 0,25 6,0 2X 0,23 4,6 3X 0,21 3,8 4X 0,18 3,2 5X 0,16 2,8 6X 0,14 2,2 7X 0,12 1,6    

Before we could build the best wading boots ever made, we had to define the word “best.” After much collaboration with our designers, ambassadors and anglers from around the world, not to mention countless hours of in-the-water research, here’s what we came up with: The best wading boots need to be ultra-comfortable and supportive for long days in heavy water. They should grip subsurface terrain, muddy trails and the occasional cross-stream log. They must drain quickly and avoid holding excess water. And on top of being tough as nails, they need a lifetime measured in decades. Finally, as we all agreed, not looking like Frankenstein boots would be a plus. Once we knew exactly what we wanted, the world-renowned Danner Boots came into the frame. We combined our fly-fishing experience with Danner’s legendary quality and craftsmanship to create a wading boot beyond all others—each one proudly made by hand (with imported parts) in Portland, Oregon. Their flexible, waterproof full-grain leather provides foot-conforming comfort, support and protection, while stitch-down construction creates a wide, stable base that’s easily resoled when the need arises. The adjustable lacing system has traditional eyelets across the forefoot and speed lacing through the ankle; the speed lacing provides easy tightening, supports the ankle when wading on uneven surfaces and helps lock the heel in place. And speaking of soles, when we say “sticky rubber,” we mean sticky, as in Vibram® Idrogrip, which compresses into the natural nooks and crannies of submerged rock for serious grip. They’re the best boots we’ve ever made, and we believe they’re the last ones you’ll ever need to buy. Soles accept studs for additional traction. Please note: one set of screwable spikes is included with theses Danner boots. Features: Waterproof full-grain leather treated with a PFC-free saline solution tanning process for improved resistance to breakdown, even in salt water; the leather can be reconditioned as necessary Tough 1,000-denier nylon paneling provides excellent abrasion resistance Upper is stitched to 5mm rubber midsole for stability underfoot; a second, lower midsole is made from water-resistant polyether polyurethane that adds additional comfort and support Adjustable lacing system has traditional eyelets across the forefoot and speed lacing through the ankle; the speed lacing provides easy tightening, supports the ankle and helps lock the heel in place Perforated drains on both sides of boot upper clear water quickly; for faster dry times, upper design is free from unnecessary foams and backer Stitch-down construction creates a wider platform for more stability, helps protect the boot sidewall and allows the boots to be resoled by Danner Vibram® Idrogrip sole compound specially developed for maximum grip on wet surfaces; the sole offers great all-around traction for long approaches and mixed streambed footing such as rock, gravel and mud Upper: full-grain leather with 1,000-denier 100% nylon paneling. Lining: 67% polyester/33% nylon. T op midsole: 8IR rubber. Lower midsole: polyether polyurethane. Outsole: Vibram® Idrogrip 1950 g (68.8 oz) Made in USA. To choose your wading shoe size correctly, you should note the following:To select the right size for you, please use the table down under, which shows you the German and American shoe sizes side by side. The table takes into account the neoprene feet of a wader and socks. e.g. your German shoe size is 43, then you order US size 10. Order Size / US Size German Size 7 40 8 41 9 42 10 43 11 44 12 45 13 46 14 47 15 48

TRAUN RIVER tapered leaders are manufactured from high quality nylon. The combination of a compact power transport butt part combined with a well-balanced taper let these leaders turn over smoothly. The leader can be tied at the fly line with a nail knot or looped with the integrated perfection loop. Strength Tip diameter (mm) kg 03X 0,43 11,5 02X 0,37 9,5 01X 0,32 7,5 0X 0,27 6,8 1X 0,25 6,0 2X 0,23 4,6 3X 0,21 3,8 4X 0,18 3,2 5X 0,16 2,8 6X 0,14 2,2 7X 0,12 1,6